Magnetic Stirrer & Hotplate Stirrer

• Model number: GEC-7050
• Highest temperature: 300 ?
• Plate size: 700 x 500mm
• Plate material: Aluminum
• Temperature sensor: K class thermocouple
• Heater capacity: 2.6kW
• Main unit size

• Model number: VPS-160BD
• Main unit size (mm): 160 x 160 (171) x 111
• Top board size (mm): 160 x 160
• Material: SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board m

• B-1 controller
• Corresponding stirrer: B-1
• Number of output terminals: f2.5mm mini jack x 4 pieces
• Output system: 4 output same speed
• Control system: Electronic circuit rotation speed open loop structu

• Rotation speed settings units: 10rpm
• Material: ABS resin
• Output: 24W
• Power supply: AC 100 - 240V, 50/60Hz
• Maximum usable stirring bar: f12 x 50mm
• Operating environment temperature: 5 - 40?<

• Model number: VPS-200BD
• Main unit size (mm): 200 x 200 (211) x 130
• Top board size (mm): 200 x 200
• Material: SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board m

• B-1 controller
• Corresponding stirrer: B-1
• Number of output terminals: f2.5mm mini jack x 4 pieces
• Output system: 4 output single speed
• Control system: Electronic circuit rotation speed open loop struc

• Stirrer body (small)
• Stirred capacity: 10 - 1000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 70 x 70 x 29mm
• Used temperature: 0 - 60? (underwater)
• Structure: Sili

• Model number: NMS-05
• Stirring capacity (L): - Approximately 0.5
• Rotation speed (rpm): MAX about 1500
• Material: ABS resin
• Body dimensions: 101 x 140 x 51mm
• Motor: DC brushless motor
&bu

• Model number: VPS-300BD
• Main unit size (mm): 300 x 300 (310) x 165
• Top board size (mm): 300 x 300
• Material: SPCC (acrylic coating), Top board/Phenol Resin
• Motor: Induction motor
• Top board m

• Stirrer body (large)
• Stirred capacity: 50 - 3000mL
• Rotation speed: 100 - 1500rpm
• Motor: DC brush motor
• Size: 155 x 155 x 45mm
• Used temperature: 0 - 60? (underwater)
• Structure: Si

• Model number: NMS-2
• Stirring capacity (L): - Approximately 2
• Rotation speed (rpm): MAX about 1500
• Material: ABS resin
• Body dimensions: 128 x 175 x 49mm
• Motor: DC brushless motor
•

• Specification: Simultaneous control (3 output)
• Material: Steel
• Outer dimensions: 86 x 116 (Dimensions with protrusion: 126) x 39mm
• Power supply: AC100 to 240 V 50/60Hz (AC Adapter)
• Connection cord le

• Stirrer for S-1
• Model number: Joint bar
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integr

• Specification: Individual control (3 output)
• Material: Steel
• Outer dimensions: 86 x 116 (Dimensions with protrusion: 126) x 39mm
• Power supply: AC100 to 240 V 50/60Hz (AC Adapter)
• Connection cord leng

• Stirrer for B-1
• Model number: Joint bar
•
• It is possible to be used by submerging in a water tank.
• It is capable of using in water of up to 60?.
• The stirrer body is integr

• Capacity (mL): 100 x 4
• Size (mm): 120 x 128 x 60
• Rotation speed: 300 to : 1500rpm
• Motor: DC brush motor (interchangeable)
• Magnet: Neodymium magnet (0.41 T)
• top board material : SUS304

• Specification: 50 to 1500rpm
• Rotation speed: 50 to : 1500rpm
• Size: f23 x 29mm
• Motor: core less motor
• Capacity: 10mL
• Material: Aluminium, silicone Mold
• Stirring system: Magnetic

• Digital
• Temperature control system: PID control
• Temperature settings range: -50 - 250?
• Heater capacity: 300W
• Material: Plate/aluminum (fluorine resin coating), Body/stainless steel (SUS304), steel (SPC

• Model number: HM-1N
• Rotation speed (rpm): 200 - 2500 (200 - 1500rpm when stirrer function)
• Amplitude: 4.5mm
• Rotation speed settings: Volume setting
• Rotation control system: Microcomputer method rotati